16-22+ Camaro SS Trinity 2 (T2 EX) Monitor ONLY, DiabloSport

The all-new Trinity (T2) is the most advanced performance programmer and monitoring setup of its kind. Featuring a high resolution, 5" capacitive touch screen, full swipe functionality, industry leading gauge designs, jaw dropping power potential and powerful, yet simple, user interface. The T2 is unlike anything else on the market. The T2 is available in the EX or MX versions. The Trinity T2 EX is offered in two versions, a 50-state compliant product with tunes created by DiabloSport or a CMR/custom tuning version which is capable of using tunes created by 3rd party tuners to meet your custom needs. The Trinity T2 MX is available as a monitoring only device capable of working on any vehicle, 1996 or newer, that is equipped with an OBD2 port. Now the Trinity product line has something for every type of driver, from mild to wild. The T2 is a game changer, so make sure you check out what the Trinity T2 can do for you.

Due to CARB restrictions, this product is not legal to sell or ship to California

EAS Power Switch (98609) - The EAS Power Switch is a tremendous new feature for the Trinity 2! Customers can now hook up accessories like aftermarket lights, air compressors, etc. and engage them from the Trinity 2. Install the new EAS Power Switch accessory to your Trinity 2 and you can set up and rename the switch right on the T2. The Trinity also features multiple style switches to customize the look of your switch display. The EAS Power Switch can control two accessories per each switch

EAS EGT Kit (98620) - The EAS EGT kit includes the necessary starter cable and the EAS EGT probe resulting in a seamless route to get your Trinity 2 monitoring EGTs in no time.

EAS Universal Sensor Input 5v (98605) - The EAS Universal Sensor Input provides the ability to read any 0-5 volt signal and translate that signal a meaningful value for display on the Trinity 2. This means you can add custom temperature, pressure, Air/Fuel and even Travel/Position gauges to your Trinity 2! You can rename and program the Trinity 2 to customize your gauge layouts based on which sensors you add to the system. Each Universal Sensor Input will support 2 sensor inputs. The EAS system allows for up to 8 EAS accessories to be connected at one time, resulting in a total of 16 additional sensors that can be added to your Trinity 2 device. This device will require the 98602 starter cable to connect to the Trinity 2.

Sensors from manufacturers other than DiabloSport can also be attached to a Trinity 2 device through the EAS Universal Sensor Input

• 91 Octane Performance Tune: 11HP 16TQ
• Touch Screen - Y
• Data Logging - Y
• Check Clear DTCs - Y
• Accepts Custom Tunes from CMR - Y
• Calibrate Speedometer for Gear Ratio - Y
• Calibrate Speedo for Tire Size - Y
• Cooling Fan Control - Y
• Fuel Rich/Lean Adjustment - Y
• Spark Timing Advance/Retard - Y
• Idle RPM - Y
• Top Speed Limiter - Y
• Rev Limiter - Y
• Shift Points - Y
• Shift Firmness - Y
• Disable Active Fuel Management - Y
• WOT Fuel Rich/Lean Adjustment - Y
• Disable Skip Shift - Y