C6 Corvette Pre-Cut Full Insulation Kit
The C6 Pre-cut Insulation kit comes with everything you need to insulate and provide sound deadening in your Corvette, including Pre-cut pieces for your doors.
Other kits on the market provide a similar product, but do not provide pre-cut pieces for your doors, which allow road noise to be present in your front cabin. Our kit gives you everything you need to COMPLETELY insulate your C6 Corvette.
Our kit is a non-fiberglass, non-asphalt based product which weighs in at 3.5 lbs., for those who are weight conscious, it regets 97% of the radiant heat, and knocks off 19db of sound and road noise!!!
It is only 3/16" thick, so as not to interfere with proper mounting of your panels and seats, and all holes are pre-cut & clearly labeled for your convenience.
It is our #1 goal to provide you ease of install, while making a HUGE improvement in your overall enjoyment of your Corvette!!!
Each kit is hand cut to our specifications, and guaranteed to make a dramatic difference in your C6!!!
Each kit comes with the following pieces:
- Driver & Passenger front floorboard pieces, with holes cut for seat bolts and pedals.
- Driver & Passenger side tunnel pieces, cut around your e-brake.
- Full center console pieces, with holes for the center console bolts.
- Driver & Passenger side Door Panel pieces.
- Cargo area floor pieces.
- Full Side rear wheel well pieces.
- Full back wall and corner pieces.
- Driver & Passenger Cubby hole pieces.
- Extra pieces for the rear speaker areas.
- Extra pieces for the overhead roof support.
- Extra pieces for odds and ends coverage that you may need.
Say goodbye to over-heated center consoles, and noisy front cabins!! Our C6 kit is the perfect addition to your new C6, and is recommended for every Corvette owner as the #1 modification for their Corvette!!!
Your Corvette will be cooler in the summer, alot less noisy, and you will regain use of your center console once again. :)
A lot of research and development has gone into this kit, and we are proud to say that our kit is made to our demanding specs, in house, and cut off of our own templates.
Characteristics | Value | Regulation
Cell Structure: Closed
Nominal Thickness: 5 mm (+ or - 0.5mm)
Steam Permeability: 0.033 gr/m2hkPa ASTM E-96
Noise Insulation: 19dBA IRAM 4063 at 50hz.
Flame Spread Index/Class: 25 or less/ "A" - Class 1 0 ASTM E-84
Smoke Index/Class: 450 or less/ "A" - Class 1 15 ASTM E-84
INSULATION LAYERS
Aluminum Foil
polyethylene backing
closed-cell Polyethylene foam
polyethylene backing
Aluminum Foil
Don't forget to order a roll of tape!!
|
Sale Coupon Codes:
