C7 Corvette Z07 Iron Two-piece Rotor Kit Replacing OE CCM Rotors for C7 Z07 Corvette with Pads Included

C7 Corvette Z07 Iron Two-piece Rotor Kit Replacing OE CCM Rotors for C7 Z07 Corvette with Pads Included 

XT910 - Street (PD1395A-391 & PD1165-391) [Included in price]

Optional: XR70 - Track (PD1395A-3R7 & PD1165-3R7) [Add $210.00]

RB Iron Two-piece Rotor Kit Replacing OE CCM Rotors for C7 Z07 Corvette (P/N 2242 & 2368)

This kit includes:

2 Front RB Iron Rotors (390x36mm vs. OE 394x36)
2 Rear RB Iron Rotors (390x30mm vs. OE 390x32)
1 Car set of XT street performance brake pads (see options above for available upgrades)

Benefits:

Less expensive and last longer than stock (CCM) rotors
Pre-assembled for easy bolt on installation
Retain use of stock emergency brake
Replacing only rotor rings which cost less than 1/3 of a new CCM rotor

Rotor Material: Racing Formula Alloyed Gray Iron & Heat treated
Machining: Open Slot
Surface: EDP Coating w/cross cut grinding on friction surface

Replacement Components:
Front Rotor Ring: D602-01-381
Rear Rotor Ring: D603-02-381

1. Convergent vane design
   
   The cooling vanes are of a convergent nozzle design, which increases airflow and turbulence and makes discs cooler. (Illustration #1)
   
   
   
   
   
   
   
   
2. Center-mount design
   
   The center-mount flanges for hat mounting to the rotor ring have several benefits. (Illustration #2)
   • It allows the ring to be used on either side of the vehicle simply by mounting the hat on either side of the ring (unidirectional).
   • The stress load transferred from the ring to the hat is balanced.
   • Air inlets are widely open to both inboard and outboard sides of the rotor. More air suctions and even temperature on both sides of the disc surface.
   • Heat transfer from the disc surfaces to the hat is even and minimized by increasing the flange length and the airflow around the flanges.
   • Mounting flanges are on both friction surfaces ultimately provides excellent heat balance.
3. True floating design
   
   Exclusive full floating design with 10.9 grade alloyed hardware. Hardware is DACRO coated and crimp locking. DACRO is highly corrosion resistant and provides a film for easier movement between the hat and rotor ring as disc expands and contracts and the crimp design provides positive engagement without rattling or torque loss at temperature.

1. Iron sleeve insert

RB aluminum rotors hats are constructed of aluminum with an iron sleeve insert. This allows for significant weight savings while still preserving the use of the stock emergency brake. This design is only available through RB.