1997-2013 C5 C6 Corvette SKF X-Tracker HD Racing Bearing - Factory Studs

1997-2013 C5 C6 Corvette SKF X-Tracker HD Racing Bearing - Factory Studs

• Will Fit C5, C6
• Interchangeable from Front to Rear
• ZR1 Technology
• 10 Micron Run-out
• Increased Durability
• Reduce Caliper Piston Knock Back
• Improved Steering Accuracy 

ANYONE who knows anything about C5/6 track or autocross cars knows that these wheel bearings are a MUST HAVE. If not, you're playing with fire and can see catastrophic failure from loosing brakes to even loosing a wheel. Just check out the numerous YouTube videos out there on wheel bearing failure.

With the SKF X-Tracker hub bearings, there's a gain in increased stiffness for better brake performance under high loads. Under race competitive use, you may go an entire season without replacement.  This unit is designed to provide a high stiffness during cornering, reducing piston knock-back and the need to trail brake. It's also designed for durability and to maintain preload at a sustained loading of 1.2g. All this adds to faster lap times and better driver feedback.

Variation: Factory Studs