C6/Z06, Grand Sport Corvette Brake Pad EZ Bolt Caliper Pins 2 Pins only

This brake pad EZ bolt is designed and made exclusively by RacingBrake to replace the bolts that come with the original caliper and tend to bind to the caliper and break.

RB EZ bolts are made of high strength alloyed steel and heat-treated to class 9.8; the surface is coated with cold zinc using dacrotized process which is about 2-3 times more corrosion resistant than conventional plating. This is the same coating we used for our two piece rotors fasteners.

Install and remove with metric socket M10 to avoid stripping hex head and torque to OE spec. No anti-seize or thread lock should be applied.

The standard M10 hex head makes it very easy to change the pads with only a few turns. The sleeve is of stainless steel material and provides the proper tension to hold the pads in place without excessive pad movement (play) like OE.

You would need 16 bolts (8 per caliper) for front and 12 bolts (6 per caliper) for rear.

Qty: 2 ea/pack

r.