Nitrous Outlet DIY Stand Alone Remote Bottle Opener Wiring Harness, 12-11500-RBO

• Easy wiring solution to installing a remote bottle opener

• Harness Routing Instructions

• Detailed Colored Wiring Diagram

• Deutsch Connectors

• High Quality Molex Terminals

• Bueler 40/60 Amp Relays

• Protective Expandable Wiring Loom

• Automotive Copper Core Wire with Protective Silicone Coating

• Inline 10 Amp circuit breaker

• 2 Way Momentary Rocker switch

New Wiring Harness Upgrade!

The Nitrous Outlet DIY Remote Bottle Opener Pro Wiring Harness is designed to provide a quick and easy wiring solution to installing a remote bottle opener. 
 
The most time consuming and complicated part of the wiring process is eliminated with the detailed instructions, colored wiring schematics, pin out sheet, and universally mounted prewired relays.

Installation requires 7 easy steps.

Step 1: Determine location and mount the relays.
Step 2: Route the main power wire and ground wire.
Step 3: Route the wiring to the system components.
Step 4: Cover the wire with the protective expandable wiring loom.
Step 5: Cut the wire to length.
Step 6: Terminate the wiring ends and connect to the system components.
Step 7: Connect power and ground source and check operation.