1997-00 Corvette Halltech C5 Killer Bee II 1997-2000 C5 LS1 Conversion Package

1997-00 Corvette Halltech C5 Killer Bee II 1997-2000 C5 LS1 Conversion Package

Filter Option: TKO Attack Blue Nano Dry Filter (out of stock) [ | Discounted KEVLAR sleeve?: Add 1 KEVLAR sleeve [Add $50.00]

Because this system MUST be tuned after uploading new MAF tables, it is intended primarily for our installing dealers (it is not a DIY install unless you have the correct software and know-how).

Halltech 97-2000 C5 Killer Bee™ Conversion Package LS1:
Halltech High Flow Killer Bee™ II induction intake
Halltech SuperBee filter with velocity stack
Provision for your A.I.R. Pump if required (default is delete)
Halltech H108125 MAF Adapter 3 pin w/ IAT to GT Pigtail Wire harness
GM new MAF sensor (probe style from the LS7/LS3)
Halltech tested MAF tables for the ECM
Test results
Facts: expect to gain +24 HP (see attached dyno) vs. the stock intake and +12 RWHP over the Vararam (see dyno) The Halltech Killer Bee™ II 1997-2000 C6 LS1 Conversion Package will provide airflow to 800 HP on the LS1, so it may be overkill for the average LS1. The package includes the all new C5 Killer Bee™ II Cold Air Induction System designed originally for the C6Z06, and includes our H108125 MAF Adapter 3 pin w/ IAT to GT Pigtail and the probe style LS7 MAF sensor, Reprogramming the MAF curve is not optional since the new probe style MAF requires a totally different curve. We will make the MAF transfer curve tables available free of charge if you email [email protected]. They may need to be tweaked a bit, but you will get the car running with our MAF calibration tables.

We do not recommend cutting any holes in your radiator shroud (in an attempt to get more air to the filter). It is not necessary, and will cause lean codes and surging.

We've got you covered if you favor a dry filter or an oiled filter. Choose from our 4 options:

• S&B Red Oiled Filter
• S&B Blue Dry Filter
• S&B Gray Oiled High-Flow Track Filter
• TKO Attack Blue Dry Nano Filter