14-19 (Old Body) Silverado Radar Detector Harness Manual Dim Mirror with extra l

This harness is for installing your radar detector into your 2014, 1500 model or 2015-2019 old-body style Chevrolet Silverado.  This harness saves you from splicing and/or entering pins into your truck's wiring harness. 

There are two different connection points for this harness.  If you have a manual dimming rear-view mirror, the connection will be at the fuse block.  If you have an auto-dimming mirror, it will connect in line with your mirror harness.  A manual dim mirror will have a flip lever on the bottom side that is used to dim the mirror.  An auto-dim mirror will not have a lever on the bottom. 

This harness is for all radar detectors that use a phone cord-style connector (RJ11).

The harness is also available with a separate power and ground wire for those who may want to add in a dash cam or such.  Please note that these loose leads are an ignition-based 12-volt feed and ground.  Most dash cams and such require 5 volts, and you will need to make sure to use a voltage converter if needed.  This is not included with this harness.

Works on 2014, 1500 models only.  
Works on all 2015-2018 Chevrolet Silverado's as well as 2019 Old Body Styles

 Please type in your vin# below, and we will confirm that you have selected the correct harness

Product Overview: 

Install Guide:

Manual Dimming Mirror Install: