Lingenfelter TMR-001 Timer Control Module

Product Details

• Allow pumps and/or fans to run for a specified time
• Time delay for drag racing, standing mile, and other racing events
• Delay nitrous activation for a specified time
• Activate timing retard after a specified time
• Improve reaction time consistency by allowing racers to release the line-lock or trans-brake button at the top of the Christmas tree.
• Cycle testing equipment based on a repetitive ON and OFF time

• The TMR-001 is designed to control two relays based on a single stage timer. This module can be used to activate two relays to control fans, pumps, or other devices while the vehicle is keyed off. The TMR-001 can keep the devices on for a specified time. The TMR-001 can be used to delay nitrous activation and activate timing retard after a specified time. The TMR-001 also provides two different modes that allow the time to repeat or only allow the time to run once.

• Two easily adjustable normally open or normally closed relay outputs
• One +12V timer activation input.
• The TMR-001 can be adjusted in 0.01 second, 0.1 second, or 1 minute increments.
• The TMR-001 delay can be adjusted from 0.01 seconds to 999 minutes.
• Repeat Mode and One Shot mode.
• Three easily accessible buttons for programming and starting the timer.
• One bright three-digit display used to display time and display settings while programming.

• High current capacity - 10 A
• Anything that draws above 10 A needs to use an external relay.
• Can be used to control up two devices including fans, electric water pumps, and other devices.
• Cool the vehicle after the vehicle is keyed off.
• Can be used for cycle testing using the repeat mode.
• Works over a wide temperature range

• Voltage operating range: 9-18 volts
• Max current: 10 A
• Black anodized aluminum enclosure
• Fully potted internally
• Includes mating harness with fully sealed connectors
• 1 year warranty