3 easy steps for using the 3M Headlight Lens Restoration
System. First, sand the hazed surface in a two-stage wet sanding process with
the enclosed sanding pads until the surface is smooth and the dulled layer is
removed. Then polish with the 3M plastic polish, and buff with the buffing pad
to the level of clarity desired in the plastic. In addition to a standard
household drill mentioned (1200-1600 rpm) used in the buffing process, you will
also need 3M Automotive Masking Tape to protect the body panels of your car
surrounding the work area, and a spray bottle and water used in the wet sanding process. Otherwise, everything that you need is
included in the kit. What's in the Box? 1-disc pad holder, 1-3M
soft interface pad, 6-3M sanding discs, 4-3M finishing discs, 1- 3M
trizact disc, 1-3M headlight lens polish/rubbing compound (1 oz), 1-buffing pad, step-by-step
directions. |