2020-27 C8 Corvette Z06/Grand Sport Paragon and Lowering Springs by Hyperco

By starting work early on with Hyperco, Paragon Performance helped create a lowering spring option for the C8 Corvette Z06. 

Lowers 1 inch on all C8 Corvette Z06's AND Grand Sport models (With Z52 Sport or Track, Without X drive assist)

The lowering spring kit offers 1 inch of lowering front and rear. Combine that with the factory adjust-ability of .75 inch lowering you can achieve a total lowering of 1.75 inches. The spring is also 30% stiffer than factory giving increased handling without sacrificing low speed ride comfort. Cars that have front lift can use these springs and our lowering collars up front to achieve the same drop.

These have been specifically engineered to work with the factory shocks. Using 3D scanning technology, the entire suspension was scanned, measured, and studied. This resulted in a spring that works with the factory shocks to maintain correct geometries while lowering the vehicle and increasing handling. Anything beyond what these springs offer would require an entire new set up, much like aftermarket coilovers.