C7 Corvette SNOW Performance Stage 2 Boost Cooler, Progressive Water-Methanol Injection Kit

Snow Performance is the oldest company making water methanol injection kits. These kits come in several variations for gas and diesel to fit all sorts of price point. Snow also offers kits that are tailored to specific vehicles.

C7 Corvette SNOW Performance Stage 2 Boost Cooler, Progressive Water-Methanol Injection Kit

Increase Horse Power up to 20%
Reduce Air Inlet Temperatures up to 100 Degrees
Increase Pump Gas Octane by 25 Effective Points
Increased Boost & Timing
NO DETONATION!

The Science of Water Injection
Our gas water-methanol injection kits produce a finely atomized mixture that's injected into the combustion chamber at precise times. The water enters the combustion chamber and decreases the inlet air temperature by up to 100 degrees more than any air to air intercooler. One of the highest octane fuels on the planet, methanol, enters the combustion chamber and spikes the effective octane of the fuel you are using by 25 points. Combine the two together and you now have one of the coldest air charges possible and a octane monster running race gas!
The Chemical Intercooler
A Snow Performance water-meth kit will lower IATs up to 100 degrees instantly! Increasing performance and giving you the most from your vehicle
Octane Monster!
Octane! Octane! Octane! When injecting a 50/50 mix of water-methanol the effective octane of your fuel will increase 25 points! Turning 91 octane pump gas to 116 Race Gas Quality fuel!
Detonation Control & Safety
Because your vehicle now has much colder IATs and impressive octane you can increase boot and ignition timing for HP gains of up to 20%! Or add it on top of high octane fuel/E85 for significantly cooler IATs and added safety.

The Snow Performance Stage 2 MAF/MAP water-methanol injection system is designed for all naturally aspirated/forced induction vehicles utilizing a Mass Air Flow (MAF) sensor or Manifold Absolute Pressure (MAP) sensor. The Stage 2 uses a progressive controller that proportionally injects more or less water-methanol according to MAF/MAP output. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to MAF/MAP sensor input gives an accurate delivery of water-methanol for small fast spooling turbos and positive displacement superchargers that hit boost almost instantly and allows the most accurate injection curve which translates into the highest cooling and performance gains. Proven to deliver 20-35 HP and 45 FTLB of torque on all naturally aspirated applications and 50-80 HP increases and up to 100 degree drop in air temps for all positive displacement superchargers and small fast spooling turbos! Comes with adjustable progressive MAFU controller, 4AN fittings, and stainless steel braided line to mount pump/tank in engine bay of vehicle.