AIS Competition Fender Mount Water Methanol Injection Kit, Stage 1

AIS Stage 1 Competition Fender Mount Adjustable Boost Activated Water Methanol Injection System

Here it is for the ultimate in performance and affordability. Our competition fender/firewall mount adjustable boost activated water methanol kit is one of our best sellers. Designed specifically for those who are on a budget. This is a good choice for low to medium boost set ups, intercooled or non-intercooled, who are looking for an affordable octane enhancement and substantial drop in air charge temperatures. This kit comes with everything you need including the tank. See exact system contents listed below.

System Contents Include:

    Competition 3 quart tank
    250 psi pump with EPDM seals for 100% methanol or alcohol
    Adjustable boost activated switch from 1-25 psi
    Heavy duty check valve with quick disconnects
    20 ft of black high pressure tubing
    5 ft of vacuum tubing
    25 ft of electrical wire
    Green LED status light
    Nickel plated injector
    Interchangeable nozzle sized to application
    Fuse holder with fuse
    10 ea. 8" zip ties
    5 ea 4" zip ties
    Hardware for securing pump to vehicle

Engineered specifically for both carbureted and EFI forced induction applications. Our Stage 1 boost activated fender/firewall mount kit is as affordable as it gets. Once installed and hooked up, operation is very simple. Simply begin by adjusting the adjustable boost activated switch mounted on the pump to your desired boost activation point ranging from 1-25 psi. During driving conditions, the system will remain on stand by untill the predetermined boost activation point is reached. Once activated the system will spray a flat continues amount of fluid through the nozzle or nozzles. The water alcohol injection system will remain on until boost drops back down below the set activation point. System then remains on stand by ready to be activated again.

Lower Air Temps By 50-200+ Degrees & Increase Power 10-15% With ONLY Windshield Wiper Fluid!
That's right! Using nothing more then windshield wiper fluid you can quickly achieve the benefits of a water methanol injection system. Best of all, it's very easy to locate just about anywhere in the states and cost only $2.00-$3.00 per gallon. But not just any windshield wiper fluid will do. You'll need to buy the windshield wiper fluid that is rated for negative 20 degrees or greater below zero. It is only this windshield wiper fluid, which contains a 50% content or greater of methanol. Using strictly windshield wiper fluid you can expect to see a 50-250+ degree drop in air intake charge temperatures on supercharged and turbocharged engines with horsepower gains ranging from 10-15% are common. (temperature drops and horsepower gains vary depending on engine build, type supercharger or turbocharger used, amount of boost and intercooled or non-intercooled)

110+ Plus Octane With ONLY Wind Shield Wiper Fluid!
Thats right! Using nothing more then windshield wiper fluid as listed above you can effectively increase your 91-93 octane pump gas by 10-20+ points dramatically increasing your fuels octane rating well over 100+ octane. No need for expensive racing fuels which can cost as much as $16.00 per gallon at some race tracks. Windshield wiper fluid cost's only $2.00-$3.00 per gallon. Even better our 1.5 gallon trunk mount container will last up to 2-3 weeks before needing to be refilled on a typical 500-600 horsepower supercharged or turbocharged motor costing you only pennies more per gallon to have 100+ octane.

Water Methanol Injection = Cheap Insurance For Your Motor
You wouldn't drive your car with out car insurance. Now theres insurance for your motor. Protect your motor and the investment you have in your motor with proven lower air intake charge temperatures by 50-250+ degrees and increased octane by 10-20+ points. Together this will reduce and help eliminate engine damaging detonation. It's cheap insurance for your motor.

Benefits Of Water Methanol Injection:

    Lower air charge temperatures by 50-250+ degrees
    Reduces cylinder temperatures up to 300+ degrees
    Increase your 87-93 pump gas by 8-20+ points
    Increase horsepower safely by 10-15%
    Allows you to safely run more boost and timing
    Cools and protects the tops of your pistons and upper ring
    Longer more stable combustion expansion and progression
    Removes carbon build up from combustion chambers, pistons and valves
    Reduces & helps eliminate engine damaging detonation & pre-ignition
    No need for expensive racing fuel or additives

Features vs. Leading Competitors:

    Compatible with 100% alcohol, methanol or ethanol
    Nickel plated injector nozzle holder
    Check valve with quick connect fittings for quick installation
    Lightning fast response via boost signal

Important Notes:

    Requires only basic hand tools to install with the exception of a tap set to thread and install injector
    Proper tuning is required to achieve maximum results

Installation Time:

    Installation time approx. 4-5 hours

Availability:

    This product normally ships within 1-2 business days when in stock. All customers will be notified of availability time shortly after orders are placed

Warranty:

Lifetime Warranty