Corvette 65-82 D8-4 Wilwood Aluminum Rear Brake Kit (Natural)Wilwood

Wilwood's D8-4 calipers are a direct bolt-on replacement for the 1965-1982 Corvettes OE brake caliper. Forged billet aluminum bodies, stainless steel pistons and high-temperature seals put an end to the rust, bore pitting and seal failures that plague the factory Corvette caliper design. D8-4 calipers provide both high performance and low maintenance, a 56% weight reduction, and high temperature reliability for the street or your favorite track event.

Wilwood's D8-4 calipers mount in the stock location over stock rotors, use the original style D8 brake pads, and fit snugly inside most 1967 or newer production wheels. Some wheels, including the 1965-1966 OE "JK" code steel wheels and a few aftermarket replica alloy wheels, will require a 3/16" or wider wheel spacer for clearance.

D8-4 Wilwood Corvette brake caliper kit contains DOT compliant stainless braided brake lines and BP-10 compound high friction street brake pads. Calipers are available in cast aluminum or powder coated red or black. Please call your salesperson for any questions. No Discount.

Note: 1973-1982 Corvettes with original Kelsey Hayes aluminum wheels may require the use of a 3/16" wheel spacer to provide additional clearance between the wheel and the Wilwood brake caliper.

Wilwood Item Number 140-10790