Halltech Bumble Bee Carbon Fiber LS7/LS3 Corvette Cold Air Intake System

Halltech Bumble Bee™ Carbon Fiber Induction is made exclusively here in Wisconsin by the folks that bring us the C6.RS and C6.R body.  12 RWHP can be expected with Halltech's Bumble Bee™, over 36 HP with the Super Beehive™ Ram Air Shroud (optional) from cooler air and gained timing.  What the dyno cannot show you is the 3% increase in power gained from our Ram Air Ports, 1% more power for every 10 degrees cooler denser air brings, and timing conservation from the heat isolation of the filter with our Super Beehive™ RAIS shroud (optional).  It cleans up the area under the hood, and is completely warranty safe.   No tuning, no cutting, no water issues as with the hydrolock concerns of most of the other systems made for the Z06 and LS3.  The velocity stack built into the super high performance Bumble Bee™, keeps turbulence low, and increases the airflow to over 1500 cfm with our filters.  (The stock Z06 requires 720 cfm to make 505 HP).  Our prototype was tested for Katech's new Club Sport Ultra-light Z06, and helped make the 535 HP that platform puts out.  The Super Beehive™ Ram Air Shroud not included in pricing.  Add $599.99 for the Super Beehive if purchased concurrently with the Halltech Bumble Bee™.
 
Features

    * Warranty Safe
    * Ambient Air Induction System utilizes the stock NACA Ducting
    * Easy Installation
    * No Cutting or Hacking your new car
    * +12 HP/11 ft. lbs torque without tuning
    * Largest MAF Housing (103.5mm) in the industry
    * Video Instructions
    * Full Tech Support from Jim Hall
    * Smoothbore High Temp Silicone Hose Connector
    * ISO 5011 Certified (99.4% efficiency) Filter
    * Velocity Stack Filter Flange design
    * 1" MAF Insertion for High Flow vs. 2" stock
    * Exclusive Katech Performance Product by Halltech

Usually Ships in 1 to 2 Weeks