2010 & Up Camaro Pace Car Style Rally Stripe Decal Kit

Pace Car Style Rally Stripe Decal kit for the 2010 & Up Chevrolet Camaro.
Buyer has the option of choosing Gloss Black, Flat Black, Silver, Red, White,
Orange, Yellow or Dark Charcoal Metallic.

Kit comes compete with Hood, Fascia, Roof, Trunk, Spoiler, Rear Fascia and Dash Stripe Sections.

Choose from Style "A"thru "F"

Styles A, C & E have NO cutout on front fascia.

Styles B, D & F ARE cutout on Front Fascia

Rider have been in the automotive aftermarket business for close to 20 years.

For the Best Fitting, Highest Quality, Custom Stripes, Decals and Graphics for your 2010 and up Chevrolet Camaro!!!

You get both sides, the left and right sides are included. as needed. These kits have been designed to be installed by one person in about 60 to 80 minutes.

The Graphic Kits can easily be removed within the first year, after that you may need to heat them up with a blow dryer (Not a Heat Gun!) to warm them up and make it easier to remove them. The graphics are considered permanent since they are manufactured and tested to last for years in the harsh elements, but they can be removed at any time.

All Kits are listed with Standard Stock colors. Additional Colors and Special Order Colors are available for an Additional Fee. Check out the Color Charts to see what is available. Click Here for Color Charts

The Pre-Pask (Masking) is an See-thru layer on top of the kit which allows the kit to retain its shape when you place it on a vehicle. You squeegee the kit right through the pre-mask layer and pull it off when the kit is completely squeegeed onto the vehicle. If you are doing a wet installation, wait at least 15 minutes before removing the pre-mask layer. When you remove the premask, pull evenly and slowly, back at a sharp angle to avoid lifting the kit.

All Vinyl Graphics are Custom order items and require prepayment before shipping. Custom or special order items are items that are made to order, special size or other non-stocking items. Absolutely no returns, credits, or exchanges once any pieces are Manufactured. All items should be inspected for defects or damage  and "dry fitted" prior to being installed. Installation instructions provided should be followed completely.