C6 Corvette Drag Racing Package - Level II AFE/PFADT

Pfadt Race Engineering offers a wide variety of suspension components to fit a wide variety of needs. If you're taking your Corvette to the Drag Strip, suspension is very important when it comes to putting you hard-earned horse power to the ground! Our Corvette Drag Package Level II is a great starting point

The Pfadt Drag Package Level II Includes:

    * Pfadt C6 Adjustable Coil Overs with custom front springs
    * Pfadt C6 Competition Rear Sway Bar
    * Pfadt C6 Rear Spherical Bearing Kit

The Pfadt Coil Overs offer some great features in an affordable, easy to use package with Drag Specific spring rates. The Pfadt Coil Overs feature a single damping adjustment at the top of each shock that adjusts both rebound and compression in a ratio of 3:1. This adjustment gives you the ability to tailor the coil over to your specific car and track conditions. For example, on the trip to your favorite Drag Strip you can dial the coil overs to a setting of 6-8 which will give you a smooth comfortable ride. Once you get to the Strip dial the coil overs to a setting of 2 in the front and 10 in the rear for example. These coil overs also feature a separate ride height adjustment. This adjustment is independent of both spring preload and shock travel. What this means to you is, regardless of the ride height that you are looking for you will retain the full shock travel to soak up all the hard launches that you can throw at it.

If you are looking for the ultimate in sway bar technology then you need to look no further then the Pfadt Competition Rear Sway Bar. The Rear sway bar features a hollow Chromoly bar that is splined on each end to accept our splined CNC machined sway bar arms. The arms are made of 7075-T6 aluminum a grade aluminum that is more commonly found on military aircraft then on street/drag cars. The rear sway bar has three adjustments so that you can perfectly tune in the launch of your car for your combination of tire size, suspension setup and horse power. Then endlinks that are featured in our Competition kit include custom made 3/8", Teflon lined rod ends for years of quite operation. The hardware for mounting the Competition Drag kit is custom made to accept the light weight 3/8" endlinks.

If your car still has the factory rubber bushings, youre losing valuable 60 ft., E.T. and control due to the flex of the soft rubber bushings installed at the factory. The Pfadt Race Engineering Spherical Bearing Kit is designed to eliminate all unwanted deflection while minimizing friction. Minimizing friction in the rear suspension will allow the suspension to respond to the smallest imperfection in the road surface. Keeping the tires in contact with the ground and maximizing traction. The rear Spherical Bearing Kit replaces all 10 control arm bushing in the rear suspension.