This brake pad EZ bolt is designed and made exclusively
to replace the bolts that come with the original caliper and tend to bind to the
caliper and break.
EZ bolts are made of high strength alloyed steel and
heat-treated to class 9.8; the surface is coated with cold zinc using dacrotized
process which is about 2-3 times more corrosion resistant than conventional
plating. This is the same coating we used for our two piece rotors
Install and remove with metric socket M10 to avoid
stripping hex head and torque to OE spec. No anti-seize or thread lock should be
The standard M10 hex head makes it very easy to change
the pads with only a few turns. The sleeve is of stainless steel material and
provides the proper tension to hold the pads in place without excessive pad
movement (play) like OE.
You would need 16 bolts (8 per caliper) for front and 12
bolts (6 per caliper) for rear.
EZ bolts are sold in car set quantity of 28 bolts per
car or smaller quantites as listed below.