QA1 Corvette Single Adjustable Billet Shock Absorber, C5/C6 1997-2013, Set of 4

QA1 Corvette Single Adjustable Shocks, Stock Mount Shock Absorbers for your 1963 - Present Corvette

This is for a Set of 4 shocks, 2 Front TS510 and 2 Rear TS705

QA1 offers aluminum single adjustable shocks for your 1963 to present Corvette, providing simultaneous compression and rebound adjustment with one easy-to-reach knob. With its smooth look, high performance handling and unbeatable price, you can't go wrong with a QA1 Corvette single adjustable shock.

    Aluminum
    Non-Coil-Over and Coil-Over
    Made in the U.S.A.
    Easy, Bolt-In Installation
    100% Dyno Tested and Serialized.

Notes: Some front applications may require the lower a-arm to be dropped for installation. Body diameter may be too large to allow mounting from the bottom. Some control arm's shock openings may need to be enlarged to accept a QA1 shock.

Stud mounts are measured to the shoulder of the stud. Add 13/16" for installed compressed length per stud mount. Loops and t-bars are measured to the center of the loop. Lengths may vary slightly.

Due to deviations from the factory ride heights, it may be necessary to check the actual ride height of your particular applications. See our Tech section for information on measuring proper ride height.

For 1997 - 2013 applications, some of the original mounting hardware may be reused or new replacements may be ordered from your local Chevrolet dealer. Excluding select ride control. Includes Z06.

The C-Series shocks for the C5/C6/Z06 Corvette, are machined from forged aluminum then bright anodized for unmatched strength and show quality appearance. These shocks are assembled by hand under our ISO 9001 quality system, using only the highest quality components, such as our 5/8 triple chrome piston rod, exclusive sealing system, and the highest quality fluid. Each shock is also individually dyno tested. Plus, the C-Series shocks are rebuildable and revalvable for a lifetime of high performance use. With the adjustability of these shocks they are perfect for Street, Auto Cross, Road Race and Drag Racing. *Note add a set of Hotchkis high performance sway bars part#2234, for the ultimate in on road and track performance.

QA1 TS510, Set of 2
Shock Absorber; Stocker Star (R); Twin Tube; Limited 1 Year Warranty; Simultaneous Compression And Rebound Valve Adjustment; Without Shock Boot; Silver Shock Body; Single

QA1 TS705, Set of 2
Shock Absorber; Stocker Star (R); Twin Tube; Limited 1 Year Warranty; Simultaneous Compression And Rebound Valve Adjustment; Without Shock Boot; Silver Shock Body; Single