Zip Corvette's research & development team created a new
lowering kit for your C6 Corvette which will help give your
Corvette the attitude you're looking for. These new polyurethane
bushings install over your EXISTING spring adjusting bolts once the
original rubber bushing has been removed. Installation requires
disassembly of your front & rear suspension, cutting the
original rubber bushings off the factory bolts and slipping our new
bushings over the bolt heads, protecting your aluminum control
arms. Instructions included.
Zip's polyurethane cushions were custom designed for your C6
Corvette's suspension. The top surface is NOT flat like factory
rubber bushing. Flat polyurthane bushings will bind as the
suspension actuates causing the bushing to tear - Zip's bushings
are designed with a convex radius that allows the bushing to slide
as the control arms pivot. Our bushings are also designed to snap
over the spring bolt rather than being permanently attached - this
design keeps the bushing from breaking away from the adjustment
bolt as the suspension moves.
Zip's lowering bushings are proudly made in the USA.